NEC Univerge sv8500 Manual page 543

11. To show Release Signal
MC-MG > SHOW RELEASE_SIGNAL
. R elease Signal is ON.
12. To show DSP smooth PAD mode
MC-MG> SHOW SMOOTH_PAD_MG
Smooth PAD Mode is 3.
13. To show RVS mode (for Australia)
MC-MG> SHOW RVS_AUST
Reverse Watch (AU) is ROA.
14. To show Auto Polarity
MC-MG> SHOW AUTO_POLARITY
Auto Polarity is ON.
The current setting is shown
The current setting is shown
The current setting is shown
The current setting is shown
VOL.2-290
MC & MG with PFT