NEC Univerge sv8500 Manual page 997

11.6.3 Power ON
Turn ON the power of MG-BRI.
STEP 1
Make sure that external maintenance terminal (PC) is connected to MG-BRI and turn ON
the power of MG-BRI. Lights come ON by plugging in the power supply AC Adapter
into the socket. (Confirm that "POWER" lamp ignites in green.)
AC Adapter
Confirm that "POWER" lamp ignites in green.
STEP 2
POWER LED
ON
POWER LINE 0 LINE 1 Tx/Rx LINK
LINE
B D B D
MG-2B
Front side
VOL.2-744
Terminal Software
External
Maintenance
Terminal (PC)
MG-BRI
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required