NEC Univerge sv8500 Manual page 1078

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

The result of data setting is shown in a 1-byte (hexadecimal) format in accordance with the setting dialog
Note:
followed by the prompt. The meaning of 1-byte data is shown below:
Prec.
When D: DIFFSERV is selected:
QoS [I (IP PRECEDENCE)/D (DIFFSERV): IP PRECEDENCE]:d
DSCP (0-63: 48): 48
The result of data setting is shown in a 1-byte (hexadecimal) format in accordance with the setting dialog
Note:
followed by the prompt. The meaning of 1-byte data is shown below:
DSCP
5.
VLAN
--- VLAN Information set ---
Current VLAN Information:
Device VLAN 1
Change VLAN Information? [Y (change)/N (current)/
Q(quit)]: y
Input new VLAN ID (0-4094): 1
Input new COS (0-7): 6
Input new IP Address: 10.41.1.200
Input new Subnet mask: 255.255.255.0
Do not assign the following addresses (network address, broadcast address) to MG(BRI).
Note 1:
(example)
- IP address 192.168.1.0/Subnet mask 255.255.255.0 (192.168.1.0 is network address, improper)
- IP address 176.16.0.0/Subnet mask 255.255.0.0 (176.16.0.0 is network address, improper)
- IP address 192.168.1.255/Subnet mask 255.255.255.0 (192.168.1.255 is broadcast address, improper)
- IP address 176.16.255.255/Subnet mask 255.255.0.0 (176.16.255.255 is broadcast address, improper)
As IP address of MG(BRI), Default Gateway, and the Telephony Server is got by DHCP server, there is no
need to assign these network data on MG(BRI) side. IP addresses listed below, however, need to be as-
signed on DHCP server side.
IP address of Default Gateway
IP address of the Telephony Server
Check the number of IP address saved in DHCP server is sufficient so as to get IP address of MG(BRI)
Note 1:
anytime.
D T R C
ID
COS
IP Address
1
7
10.41.1.200
Note 1
Note 2
Prec.=PRECEDENCE (3 bits)
D=Delay
T=Throughput
R=Reliability
C=Cost
Enter DSCP value (0-63) (Default: 48)
DSCP = Differentiated Service Code Point (6 bits)
Current data setting is displayed.
Subnetmask
255.255.255.0
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
VLAN ID: 0-4094
CoS setting: 0-7
Enter the IP address of VLAN.
Enter the subnet mask of VLAN.
VOL.2-825
MG(BRI) [SCA-2BRIA/MG-2BRIA]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents