NEC Univerge sv8500 Manual page 1081

3. Host Name of MG(BRI)
--- Host Name set ---
Current Host Name: blank
Change Host Name? [Y (change)/N (current)/Q(quit)]: y
Is there the Host Name? [Y/N]: y
Input new Host Name: mgbri.nec.com
4. IP address of Default Gateway
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y (change)/N (current)/Q(quit)]: y
Input new Default Gateway: 10.40.1.254
Specify the Default Gateway in the same subnet of MG(BRI).
Note:
5. IP address and Port Number of SIP server
See the following.
6. Host name of SIP server
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server IP Address
1 0.0.0.0
2 0.0.0.0
3 0.0.0.0
: :
-omit-
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: y
Input new SIP Server (1-20): 1
Input new IP Address: 10.41.1.150
Input new Port Number: 5060
Is there the Host Name? [Y/N]: y
Port Number Host Name
0 blank
0 blank
0 blank
: :
VOL.2-828
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Current data setting is displayed.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Asked whether to use host name.
Y: Use host name
N: Not use host name
Enter the MG(BRI)'s host name in full-domain. (up
to 63-byte of characters, . (period) and - (hyphen) is
available)
Current data setting is displayed.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the IP address of Default Gateway.
Current data setting is displayed.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the SIP server number.
Enter the IP address of SIP server.
Enter the port number of SIP server.
Asked whether to use host name.
Y: Use host name
N: Not use host name