NEC Univerge sv8500 Manual page 1134

<Standard mode for w/o DHCP server and w/o DNS server configuration>
IP Address & Subnetmask set
Assign the IP address and Subnet Mask of MG(BRI).
--- IP Address & Subnetmask set ---
Current IP Address: 0.0.0.0
Current Subnetmask: 0.0.0.0
Change IP Address and Subnetmask? [Y (change)/N
(current)/Q(quit)]: y
Input new IP Address: 10.40.1.100
Input new Subnet mask: 255.255.255.0
Do not assign the following addresses (network address, broadcast address) to MG(BRI).
Note:
(example)
- IP address 192.168.1.0/Subnet mask 255.255.255.0 (192.168.1.0 is network address, improper)
- IP address 176.16.0.0/Subnet mask 255.255.0.0 (176.16.0.0 is network address, improper)
- IP address 192.168.1.255/Subnet mask 255.255.255.0 (192.168.1.255 is broadcast address, improper)
- IP address 176.16.255.255/Subnet mask 255.255.0.0 (176.16.255.255 is broadcast address, improper)
Host Name set
Assign the host name of MG(BRI).
--- Host Name set ---
Current Host Name: blank
Change Host Name? [Y (change)/N (current)/
Q(quit)]: y
Is there the Host Name? [Y/N]: y
Input new Host Name: mgbri.nec.com
Current data setting is displayed.
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the IP address of MG(BRI).
Enter the Subnet Mask of MG(BRI).
Current data setting is displayed.
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Asked whether to use host name.
Y: Use host name
N: Not use host name
Enter the MG(BRI)'s host name in full-domain.
(up to 63-byte of characters, . (period) and -
(hyphen) is available)
VOL.2-881
MG(BRI) [SCA-2BRIA/MG-2BRIA]