NEC Univerge sv8500 Manual page 427

8. Setting DSP echo canceller for FAX communication
MC(SIP)> SET DSP_ECFB P1
DSP ECFB setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
9. Setting Training feature mode of echo canceller:
MC(SIP)> SET EC_TRAINING P1
EC Training setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
10. Setting FAX enable timer:
MC(SIP)> SET FAXERRORDETECT P1
FAX Enable Timer setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
:
P1: Select the Training feature mode of EC [ON/OFF]
ON=Training function is valid
OFF=Training function is invalid (default)
Result is shown.
P1: Enter the Change Effective Timer [0-5/OFF]
0=Invalid to change to Fax mode
1-5=Possible to change to Fax mode within 1-5 minutes
(default=1 minute)
OFF=Always possible to change to Fax mode
Result is shown.
VOL.2-174
P1: Select FAX echo canceller setting [0/1]
0 = FAX echo canceller is ON (default)
1 = FAX echo canceller is OFF
Result is shown.