9.1.2
Function Overview
Basic Connection
MG has six analog ports and connects IP Network and PSTN. Any IP terminal or SIP terminal can originate
and receive call to/from analog PSTN line when MG-COT is accommodated in the System.
For Proprietary Protocol mode, Internal PHI-BRI controls the signaling data, which is accommodated in
Note:
the Telephony Server. Call control between Internal PHI-BRI and MG-COT is executed via TCP/IP port of
the system.
In some cases, signaling data can be controlled by SP-PHI even though MG-COT operates in Proprietary
Protocol mode. For the detail, refer to "Consideration for SP-PHI Data Assignment" in Data Program-
ming Manual - Business.
For SIP mode, SP-PHI, which is accommodated in MPH (Multi Protocol Handler) of the Telephony Server,
Note:
handles the control signal from/to MG-COT. MPH is the interface for the control signal. Call control be-
tween SP-PHI and MG-COT is executed via TCP/IP port of the system.
MG-COT in the System
Proprietary Protocol
SIP
mode
mode
Internal PHI-BRI
Internal PHE
MPH
IP Terminal
PH to control this operation
MG-COT Card [SCA-6COTA/SCA-6COTC]
SP-PHI
Telephony Server
Signaling Control Data
Voice Data
MG-COT
Card
PSTN
Analog Telephone
VOL.2-503
PFT Line