NEC Univerge sv8500 Manual page 855

7. To show DSP echo canceller for FAX communication
MG-COT> SHOW DSP_ECFB_MG
DSP ECFB Mode is 0.
8. To show DTMF Cutoff Timer
MG-COT > SHOW DTMF_CUTOFF_TIME
DTMF Cutoff Time is 0 (20ms).
9. To show Training feature mode of echo canceller
MG-COT> SHOW EC_TRAINING_MG
EC Training is ON.
10. To show FAX enable timer
MG-COT> SHOW FAXERRORDETECT_MG
FAX Enable Timer is 1 minute.
11. To show FAX receiver PAD value
MG-COT> SHOW FAXRECVPAD_MG
FAX Receiver PAD is 4.
12. To show FAX sender PAD value
MG-COT> SHOW FAXSENDPAD_MG
FAX Sender PAD is 0.
13. To show Health Check Receive Timer
MG-COT > SHOW HC_TIMER
Health-Check Timer Timeout is 120 seconds.
MG-COT Card [SCA-6COTA/SCA-6COTC]
The current setting is shown.
The current setting is shown.
The current setting is shown.
The current setting is shown.
The current FAX receiver PAD value
(PSTN → LAN direction) setting is
shown.
The current FAX sender PAD value
(LAN → PSTN direction) setting is
shown.
The current setting is shown.
VOL.2-602