NEC Univerge sv8500 Manual page 436

32. Setting VLAN:
MC(SIP)> SET VLAN
Please enter a parameter.
VLAN ID (1-4094) : 1
COS (0-7) : 0
VLAN setting succeeded.
The maximum number of VLAN is one.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
33. Setting the Warning Tone for LAN failure:
MC(SIP)> SET WARNING_TONE P1
Warning Tone Control setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
VOL.2-183
Enter the VLAN_ID [1-4094]
Enter the COS setting [0-7]
Result is shown.
P1: Specify the mode (default=3)
0=Warning Tone is not sent
1=Warning Tone is sent to IP Network
2=Warning Tone is sent to TDM
3=Warning Tone is sent to IP Network and TDM
Result is shown.