NEC Univerge sv8500 Manual page 742

10. To show default receiver PAD value:
MC-MG> SHOW PAD
Default Receiver PAD is 3.
11. To show Pre-Ringing:
MC-MG> SHOW PRERINGING
Pre-Ringing is ON.
12. To show frequency of Ringer:
MC-MG> SHOW RINGFREQ
Frequency of Ringer is 20Hz.
13. To show default sender PAD value:
MC-MG> SHOW SENDPAD
Default Sender PAD is 0.
The Sender PAD is inserted in the direction of the analog terminal to the IP.
Note:
14. To show DSP smooth PAD mode:
MC-MG> SHOW SMOOTH_PAD
Smooth PAD Mode is 3.
The current receiver PAD value (LAN → terminal direction)
setting is shown.
The current setting is shown.
The current setting is shown.
The current sender PAD value (terminal → LAN direction)
setting is shown.
The current setting is shown.
VOL.2-489
MCMG Card [SCA-7COTA]