How To Back Up And Restore Config Data By Tftp Connection (Remote); Backing Up Config Data Via Tftp; Data Assignment On Tftp Server - NEC Univerge sv8500 Manual

5.4.2

How to Back Up and Restore Config Data by TFTP Connection (Remote)

This config download/upload is performed via TFTP.
Prepare the following:
- PC that is capable of Telnet and TFTP features.
- All the PCs have to belong to the same segment with 8LC Card.
- TFTP server has to be installed in advance.
- PCPro has to be installed in advance.
- 8LC Card is already registered to system and it is operating normally.
•

Backing Up Config Data via TFTP

(1) Make environment setting for TFTP
SYSTEM
(2) Make environment setting for Telnet
Note 1
PCPro
Telnet PC
Note 1
Note 1: PCPro and Telnet both can be performed by single Personal Computer.
<Data Assignment on TFTP Server>
Create a folder to back up configuration data.
STEP 1
Start the TFTP server program.
STEP 2
Assign the folder as root folder, and then permit write and read behavior of this directory. For
STEP 3
more information, refer to the appropriate manual attached to the TFTP server program.
<Data Assignment on PCPro>
To search for the LENS of the target 8LC Card, use the IPAN command.
STEP 4
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
TFTP Server
Configdata
IP Network
VOL.2-148
(4) Copy a config file into TFTP Server via TFTP
MC0 MC2 MC4 MC6
MC1 MC3 MC5 MC7
OPERATION
100M LINK CONSOLE
ON
MC0 MC2 MC4 MC6 RESET
PWR ALM LINE
Ether
MC1 MC3 MC5 MC7 MC8
8LC Card