NEC Univerge sv8500 Manual page 530

3. Setting DSP echo canceller for FAX communication
MC-MG > SET DSP_ECFB_MG 0
DSP ECFB Mode setting complete.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
4. Setting DTMF Cutoff Timer
MC-MG > SET DTMF_CUTOFF_TIME 0
DTMF Cutoff Time setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
5. Setting Training feature mode of echo canceller:
MC-MG > SET EC_TRAINING_MG OFF
EC Training setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
Line 1: Enter 0 or 1
0=FAX echo canceller is ON (default)
1=FAX echo canceller is OFF
Line 2: Result is shown
Line 1: Select DTMF Cutoff Timer
0=20 ms (default)
1=10 ms
Line 2: Result is shown
Line 1: Select the Training feature mode of EC
OFF=Training function is invalid (default)
ON=Training function is valid
Line 2: Result is shown
VOL.2-277
MC & MG with PFT