NEC Univerge sv8500 Manual page 1351

Δ
16. SET IPPADDRESS
This command is used to specify IP Address and subnet mask for MG. To make this assignment effective,
it is required to execute the "SAVE" command and to restart before exiting the maintenance command.
MG-PRI(SIP)>SET IPADDRESS 10.4.1.1 255.255.255.0
IP Address setting succeeded.
The designated IP address cannot be applied when DHCP is set to "Enabled." Be sure to assign the DHCP
Note:
setting to "Disable" before performing this IP address assignment.
The following are examples that cannot be used in the MG(PRI) setting:
Note:
(Example1) Network address cannot be assigned as IP address of MG(PRI).
IP address:192.168.1.0
Subnet mask: 255.255.255.0
(Example2) Broadcast address cannot be assigned as IP address of MG(PRI).
IP address:192.168.1.255
Subnet mask: 255.255.255.0
17. SET Δ ONE_TIME_PASS
This command is used to specify one-time password for SIP Mode. To make this assignment effective, it
is required to execute the "SAVE" command and to restart before exiting the maintenance command.
MG-PRI(SIP)>SET ONE_TIME_PASS
One Time Password: •••••
Erase start...
Erase OK!
Write start...
Write OK!
One time password setting succeeded.
ΔOWN_NAME
18. SET
This command is used to specify a host name for MG(PRI). To make this assignment effective, it is required
to execute the "SAVE" command and to restart before exiting the maintenance command.
MG-PRI(SIP)>SET OWN_NAME nec
Own name setting succeeded.
Δ Δ
P1 P2
VOL.2-1098
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
P1-Specify the IP address
P2-Specify the subnet mask
Result is displayed.
P1-Specify a password.
Result is displayed.
P1-Specify a full domain name.
Result is displayed.