NEC Univerge sv8500 Manual page 1364

RELIABILITY(0/1: 0): 0
COST (0/1: 0): 0
Signaling QoS setting succeeded.(0xC0)
When P1 and P2 are omitted (When DIFFSERV is selected)
MG-PRI(SIP)>SET SIGNALING_QOS
QOS(TOS/DIFFSERV:DIFFSERV): DIFFSERV
DSCP(0-63: 48): 48
Signaling QoS setting succeeded.(0xC0)
When selecting TOS (IP Precedence Type)
7 6 5 4
Prec
D
When selecting Diffserv
6 4 3 2
7 5
DSCP= Diffserv Codepoint (6 bits)
Δ
29. SET SIPSV_IPADDRESS
This command is used to specify
required to execute the "SAVE" command and to restart before exiting the maintenance command.
MG-PRI(SIP)>SET SIPSV_IPADDRESS
SIP Server (1-20): 1
IP Address: 10.41.1.150
Port Number: 5060
Is there the Host Name? [Y/N]: Y
3 2 1 0
T R
C
1 0
the network setting of SIP Server
VOL.2-1111
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
Enable/Disable Reliable Precedence in IP network.
0=Disabled (Default)
1=Enabled
Enable/Disable Low Cost Precedence in IP network.
0=Disabled (Default)
1=Enabled
Specify a Differentiated Service Code Point (DSCP)
value.
0-68=DSCP value (Default:48)
High 111
110
101
100
Priority
011
010
001
Low
000
EF
High
EF (Expedited Forwarding): 101110
AF (Assured Forwarding):
AF
BF (Best Effort):
Low
BF
. To make this assignment effective, it is
Specify the number of SIP Servers to be used.
1-20: The number of SIP Servers to be used
Specify the IP address of SIP Server. (Default: 0.0.0.0)
Note 1
Specify a port number to be used in the SIP Server.
1024-65535: Port Number (Default: 5060)
Prec.=PRECEDENCE (3 bits)
D=Delay
T=Throughput
R=Reliability
C=Cost
111110
000010
000000