NEC Univerge sv8500 Manual page 866

9.4.2 Error Messages
When an error occurs in using the maintenance command, error message is indicated to show the cause for help-
ing the reassignment of required data.
MESSAGE
File not found on the TFTP server.
Command not found.
Invalid parameter.
IP address form is incorrect.
VLAN ID is no more registered.
Sub command is missing.
Invalid parameter value.
Invalid sub command.
Command is abnormally terminated.
Parameter(s) are missing.
Entered VLAN ID is already registered.
VLAN ID is not registered.
This command is not supported in a present opera-
tion mode.
List of Error Messages
Download file of system data is not founded on the TFTP server.
Not supported command was entered when entering command.
Invalid parameter was entered when entering command.
IP address is entered in incorrect form.
VLAN ID cannot be registered because the number of VLAN exceeds
the maximum.
Sub command is not entered when entering command.
The range of entered parameter is incorrect.
Entered sub command is incorrect.
Command is terminated illegally.
Parameter is not entered when entering command.
Entered VLAN ID has been already registered.
Entered VLAN ID does not exist.
The entered command is not supported in the operation mode currently
works.
VOL.2-613
MG-COT Card [SCA-6COTA/SCA-6COTC]
CAUSE