NEC Univerge sv8500 Manual page 636

5. To show communication speed for LAN interface:
MC-MG> SHOW INTERFACE
Ethernet Speed DUPLEX
10Mbps FULL
6. To show IP Address, Net Mask, and Default Gateway:
MC-MG> SHOW IPADDRESS
IP Address
Netmask
Default Gateway
7. To show RTP Start Port:
MC-MG> SHOW STARTPORT
RTP Start Port Number is 1024.
8. To show the version information:
MC-MG> SHOW VERSION
MC-MG(COT) Maintenance command Version 1.00 2003.06.03
Version information
Hardware (Main)
: PZ-CC155-5A [00.00.00.00]
: PZ-CC156-5A [00.00.00.00]
Hardware (Sub)
Boot program
: SP-3777 MCMG BOOT PROG-A [05.00.00.00]
Firmware
: SP-3778 MCMG PROG-A [10.00.00.00]
Line 4~7:Version information of hardware, boot program, and firmware is shown respectively
150.10.1.101
255.255.255.0
150.10.1.254
VOL.2-383
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
The current setting is shown
Line 1: Enter the interface name
Line 2: IP Address is shown
Line 3: Netmask is shown
Line 4: Default Gateway is shown
The current setting is shown