NEC Univerge sv8500 Manual page 832

Setting Host Name of SIP server:
--- SIP Server Host Name set ---
Current SIP Server and Host Name:
SIP Server
1
2
3
:
:
20
Change SIP Server Information? [Y(change)/N(current)/Q(quit)]: Y
Input new SIP Server (1-20): 1
Is there the Host Name? [Y/N]: Y
Input new Host Name: SVR1.nec.com
Continue? [Y(continue)/N(exit)]: N
Line 4-Line 9: The current setting of the Telephony Server information (host name) is displayed.
Line 10: Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Line 11: Enter the number of SIP server [1-20]:
Line 12: Asked whether to use host name.
Y=Use host name
N=Not use host name
Line 13: Enter new host name of Telephony Server in full-domain format.
Up to 63 characters of alphanumerics, ". (period)", and "- (hyphen)" is available.
Line 14: Asked whether to continue the setting of other SIP server.
Y=Continue to register other SIP server
N=Exit this command and move on to the next command setting
This setting is required when DHCP server is "D (disable)" and DNS server is "E (enable)".
Note:
Host Name
MG-COT Card [SCA-6COTA/SCA-6COTC]
VOL.2-579