NEC Univerge sv8500 Manual page 648

[When configuration data is changed]
MC-MG> EXIT
Configuration data was changed.
* * Don't power off in progress **
y: Save and Exit.
n: Exit without saving.
c: Cancel
[y/n/c]: y
Configuration data has been saved.
->
The screen returns to the prompt of the maintenance command (MC-MG, in default) if any error occurs
Note:
when "Y" is selected after changing the configuration data.
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
Line 1:
Line 2:
Line 3:
Line 4:
Line 5:
Line 6:
Line 7: Select Y to make the changed con-
Line 8: Result is shown
Line 9: Back to the OS prompt
VOL.2-395
figuration data effective and exit the
maintenance command