NEC Univerge sv8500 Manual page 808

<When SIP Mode>
Assign the configuration data for MG-COT Card in SIP mode. About the configuration data for Proprietary Pro-
tocol mode, refer to page
STEP 1: When the boot program is started, the initial display below is displayed on the screen.
The system requires a one-time password for authentication in initial startup. Enter the same password
with the one assigned on the Telephony Server. As long as you do not enter the one-time password,
you cannot move on to the next step.
MG-ID : xxxxxxxxxxxx
Boot program version
[04.00.00.00]
Main program version
H/W PKG information
H/W PKG information
DSP information
DSP information
Starting Boot program.....
--- Online program Initial start (Wait for a while.) ---
:
: (Omitted)
:
No One Time Password!!
Please input a one time password.
One Time Password: 12345#
One Time Password setting succeeded.
STEP 2: Type "usrConsole" at the indicated OS prompt and press the ENTER key.
->
->
->usrConsole
550.
: SP3839 SH7751R CBOOT-1 PROG-A
: SP3948 6MGCOT PROG-A [01.00.00.00]
: CA-CC07 001
: CA-CC08 001
: DSP-K-AC48302ck [03.11.00.00]
: DSP-P-AC48302ce6 [03.11.00.00]
VOL.2-555
MG-COT Card [SCA-6COTA/SCA-6COTC]