MG-PRI/PRA
Type SET DHCP ENABLE
The DHCP server needs to be registered IP addresses for the default gateway and the DRS (MGC).
Confirm the DHCP server reserves IP addresses to be assigned for the clients (MG-PRI/PRA).
Note:
•
When not using DHCP
Type SET DHCP DISABLE
Type SET DEFAULTROUTE <Default Gateway IP Address>
IP address of Default Gateway is registered.
Example) 150.10.1.254
Type SET DRSADDRESS
DRS Address will be registered after responding to the sequential detailed settings. For more informa-
tion, refer to
page
968.
Type SET IPADDRESS <IP Address> <Subnet Mask>
IP address of MG-PRI/PRA is registered.
The required settings by the Maintenance Console vary depending on the network, use commands de-
scribed in Chapter 4.
VOL.2-951