NEC Univerge sv8500 Manual page 1336

COMMAND No. SUB COMMAND
1 CALL_HOLD
2 CONFIG
3 DHCP
4 DNS_SW
5 DRSADDRESS
6 DRSQOS
7 DTMF_IN
8 E_T_TIME
9 E_T_WAITTIME
10 EC_TRAINING
11 FAX_ECM
12 FAXERRORDETECT
13 HC_RCV_TIMER
14 INTERFACE
15 IPADDRESS
16 ONE_TIME_PASS
17 OWN_NAME
18 PAD0
19 PAD1
SHOW
20 PAD2
21 PAD3
22 PAD4
23 PRI_COMMON1
24 PRI_LOOPBACK
25 PRI_T1_1
26 PRI_T1_2
27 PRI_T1_3
28 RTP_STOP_DETECT
SIGNALING_PORT_
29
NO
SIGNALING_PORT_
30
QOS
31 SIPSV_IPADDRESS
32 SMOOTH_PAD
33 STARTPORT
34 TCP_TIMER
35 VERSION
36 VLAN
37 WARNING_TONE
PING -
DELETE VLAN
SAVE CONFIGDATA
GET CONFIGDATA
PUT CONFIGDATA
REBOOT -
EXIT -
INIT CONFIG
List of Maintenance Command (Continued)
Displays the state of call hold setting
Displays the state of DHCP setting
Displays the state of DHCP setting
Displays the DNS setting
Displays the setting of DRS (IP address and port No.)
Displays the QoS setting of DRS session
Displays the DTMF relay of in-band signaling
Displays the period to be executed echo canceller training
Displays waiting time before starting echo canceller training
Displays echo canceller training setting
Displays the FAX ECM setting
Displays the FAX switching time
Displays the time recognized as timeout in receiving health check.
Displays the connection mode.
Displays IP address, netmask, and default Gateway.
Displays the one-time password.
Displays the own host name.
Displays PAD setting
Displays settings for flexible PAD 1
Displays settings for flexible PAD 2
Displays settings for flexible PAD 3
Displays settings for flexible PAD 4
Displays common setting 1 of PRI (1.5M)
Displays MB of loopback and Dch
Displays function settings on Dch of PRI (1.5M)
Displays function settings 1 (Alarm/Signaling) on Dch of PRI (1.5M)
Displays function settings 2 (Signaling) on Dch of PRI (1.5M)
Display the time-out value for RTP reception
Displays the Signaling Port Number for SIP Mode.
Displays the QoS of Signaling Port Number for SIP Mode.
Displays the network settings of SIP Server.
Displays the setting of Smooth PAD mode
Displays the number of RTP Start Port
Displays the setting of the timer for TCP link connection
Displays the release version of firmware and hardware
Displays the state of VLAN setting
Displays the setting of Warning Tone
Checks the connectivity of network
Deletes the VLAN setting designating by the VLAN ID
Saves the configuration data
Downloads a system data file from specified TFTP server
Uploads a system data file to specified TFTP server
Reboots the MG
Exits the maintenance command
Initialize the config command
VOL.2-1083
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
FUNCTION PAGE
page 1114
page 1114
page 1114
page 1114
page 1114
page 1115
page 1115
page 1115
page 1115
page 1117
page 1117
page 1117
page 1117
page 1117
page 1117
page 1118
page 1118
page 1118
page 1119
page 1119
page 1120
page 1120
page 1120
page 1121
page 1121
page 1121
page 1122
page 1122
page 1123
page 1124
page 1124
page 1124
page 1125
page 1125
page 1125
page 1126
page 1126
page 1126
page 1127