NEC Univerge sv8500 Manual page 445

PING COMMAND
To check the connection status of network:
MC(SIP)> PING P1
MC(SIP)> PING 100.100.100.4
PING 100.100.100.4: 56 data bytes
64 bytes from 100.100.100.4: icmp_seq=0. time=0. ms
64 bytes from 100.100.100.4: icmp_seq=1. time=0. ms
64 bytes from 100.100.100.4: icmp_seq=2. time=0. ms
64 bytes from 100.100.100.4: icmp_seq=3. time=0. ms
----100.100.100.4 PING Statistics----
4 packets transmitted, 4 packets received, 0% packet loss
round-trip (ms) min/avg/max = 0/0/0
MC(SIP)> PING 100.100.100.4
PING 100.100.100.4: 56 data bytes
ping: timeout
no answer from 100.100.100.4
DELETE COMMAND
To delete the VLAN setting:
MC(SIP)> DELETE VLAN
VLAN deleting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
SAVE COMMAND
To save the configuration data to Flash ROM:
MC(SIP)> SAVE CONFIGDATA
** Don't power off in progress **
Do you need save? (Y/N): Y
Configuration data has been saved.
Re-starting is required for making a setup reflect!
When any error occurs during the process, configuration data cannot be saved.
Note:
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
Result is shown.
VOL.2-192
P1: Enter the IP address of the
system to access.
Connection status of the
accessing system is displayed 4
lines.
When the 8LC Card cannot
connect to network, "no
answer" is displayed.
Enter "Y" to save the assigned
configuration data to Flash ROM.
Result is shown.