NEC Univerge sv8500 Manual page 1159

Setting Host name of MG(BRI):
--- Host Name set ---
Current Host Name: blank
Change Host Name? [Y(change)/N(current)/
Q(quit)]: Y
Input new Host Name: mgbri.nec.com
Setting Default Gateway IP Address:
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y(change)/N(cur-
rent)/Q(quit)]: Y
Input new Default Gateway: 10.41.1.254
Make sure to set the Default Gateway to place on the same subnet with MG(BRI).
Note:
Line 2: The current setting is displayed.
Line 3: Asked whether to change the host name.
Line 4: Enter new host name of MG(BRI) in
Note:
The current setting is displayed.
Asked whether to change the displayed setting.
Y=change
N=not change
Q=quit this setting
Enter new IP address of Default Gateway
(e.g. 10.41.1.254)
VOL.2-906
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Y=change
N=not change
Q=quit this setting
full-domain format.
Up to 63 characters of alphanumer-
ics, ". (period)", and "- (hyphen)"
is available.