NEC Univerge sv8500 Manual page 791

MG-COT needs to be rebooted after station data is assigned to reflect change. Confirm that there is no con-
Note:
versation in progress when rebooting.
[*] Data Deletion
Deletion must be operated in the reverse order of assignment. Make sure to delete in the order of AMGIL
ATRK. (Confirm there is no data left in AMGIL before deleting ATRK)
Operate the ASYD/ASYDL/ALIDL deletion carefully because these commands are also used by other euip-
ments.
MG-COT Card [SCA-6COTA/SCA-6COTC]
VOL.2-538
→