NEC Univerge sv8500 Manual page 1115

Sub-command
24 WARNING_TONE_CONTROL
SAVE: Command to save the modified configuration
Sub-command
1 CONFIG
INIT: Command to initialize the configuration data to factory default value:
Sub-command
1 CONFIG
REBOOT: Command to reboot the MG(BRI)
Sub-command
1 -
EXIT: Command to exit the configuration setting mode
Sub-command
1 -
Displays the current setting whether to send warning tone in the
case of LAN failure.
This command is used to save the modified configuration data to the
FlashROM.
This command is used to initialize the configuration data to factory
default value.
This command is used to reboot the MG(BRI).
This command is used to exit the configuration command.
VOL.2-862
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Function
Function
Function
Function
Function