NEC Univerge sv8500 Manual page 1371

Δ
16. SHOW ONE_TIME_PASS
This command is used to display the one-time password.
MG-PRI(SIP)>SHOW ONE_TIME_PASS
One time password is 123456.
17. SHOW Δ OWN_NAME
This command is used to display the host name of MG(PRI).
MG-PRI(SIP)>SHOW OWN_NAME
Own Name : mgpri.nec.com
18. SHOW Δ PADP1
This command is used to display the specified PAD register for voice quality tuning. The following is an
example in the case of displaying PAD0.
MG-PRI(SIP)>SHOW PAD0
value is 0x0000
A-law/u-1aw Setting:0
PAD Selection
PAD Control
PAD Pattern No.
Data PAD Pattern No.
P1-Specify the register number to be displayed.
0-4=PAD Register Number
The current setting is displayed.
- CODEC
:0
0=MGC Control (PBX System Data)
:0
1=μ-law
:0
2=A-law
:0
3=Convert from A-law to μ-law
:0
4=Convert from μ-law to A-law
- PAD selection (0/1=Standard/Flexible)
- PAD Control
0=Receiving Control (MG→ISDN Network)
1=Sending Control (ISDN Network→MG)
2=Fixed to ARTD
3=Sending/Receiving Control
- PAD Pattern number (0-4)
- Data PAD Pattern Number
0=64K
1-4=Not used
- Flexible PAD #N-Recv (0-36)
- Flexible PAD #N-Send (0-36)
VOL.2-1118
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
The current setting is displayed.
The current setting is displayed.