NEC Univerge sv8500 Manual page 686

MCMG Card [SCA-7COTA]
Assign Station Release Timer (TS - release timing when connected to an ORT) and Hooking Timer (TL -
SHF maximum timing). Normally, "91" is set in hexadecimal (TS = 120 milliseconds, TL = 1,080 milli-
seconds).
For details, refer to Command Manual.
ASYDL: Assignment of System Data (LDM)
SYS1, INDEX 811
Assign the Tone Code by countries. For more information, refer to the Command Manual.
SYS1, INDEX 813
Assign the PAD value of MC
00 = No PAD control (conforms to the setting on ASYD, SYS1, INDEX 4, b5)
01 = PAD OFF (0dB)
02 = 3dB
03 = 6dB
AUNT: Assignment of Unit Data
MG: Module Group Number
TYPE: 1 (Select 1 for Unit data assignment)
UNIT0: 1/2 (Unit 0 is used/not used).
UNIT1: 1/2 (Unit 1 is used/not used).
UNIT2: 1/2 (Unit 2 is used/not used).
UNIT3: 1/2 (Unit 3 is used/not used).
ANPD: Assignment of Numbering Plan
1st DC: Assign the 1st DC of the station numbers.
NND: Assign the total station number digits.
ASPA: Assignment of Special Access Code
ACC: Assign the access code using the 1st DC specified by the ANPD command.
ATNR: Assignment of Tenant Restriction Class Data
VOL.2-433