NEC Univerge sv8500 Manual page 1302

Hide thumbs Also See for Univerge sv8500:

Table of Contents

If a prompt does not appear on the screen, press the Enter key to display a prompt.

STEP 4: Type "SETUP TP" to set the network data referring to

depending on your LAN environment.

There are two ways to set the network data;

When DHCP server is used

When DHCP server is NOT used

MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]

1089, also set the following network data

Show Quick Links

Table of Contents