NEC Univerge sv8500 Manual page 738

5. To show communication speed for LAN interface:
MC-MG> SHOW INTERFACE
Ethernet Speed DUPLEX
10Mbps FULL
6. To show IP Address, Net Mask, and Default Gateway:
MC-MG> SHOW IPADDRESS
IP Address
Netmask
Default Gateway
7. To show RTP Start Port:
MC-MG> SHOW STARTPORT
RTP Start Port Number is 1024.
8. To show the version information:
MC-MG> SHOW VERSION
MC-MG(COT) Maintenance command Version 1.00 2004.11.04
Version information
Hardware (Main)
: CA-CC04 001
Hardware (Sub) : CA-CC05 001
Boot program
: SP-3839 SH7751R CBOOT-1 PROG-A [01.00.00.00]
Firmware
: SP-3849 MCMG PROG-A [01.00.00.00]
Line 4~7:Version information of hardware, boot program, and firmware is shown respectively.
10.4.128.5
255.255.255.0
10.4.128.254
VOL.2-485
The current setting is shown.
Line 1: Enter the interface name
Line 2: IP Address is shown
Line 3: Netmask is shown
Line 4: Default Gateway is shown
The current setting is shown.
MCMG Card [SCA-7COTA]