NEC Univerge sv8500 Manual page 1239

<EXAMPLE OF PAD DATA>
- ARTD: PAD = 4
- Flexible PAD Send = -4dB(GAIN)
- Flexible PAD Recv = 0dB
To specify the above settings, perform the following steps:
STEP1) TCS_PAD0: PAD Selection =1 (Flexible)
STEP2) TCS_PAD0: PAD Control =3 (Send/Receive Control)
STEP3) TCS_PAD4: Flexible PAD #4-Recv=0
Flexible PAD #4-Recv=24
Specify PAD value for ARTD.
PAD Selection
Standard PAD
PAD Pattern (0-4)
= values of ARTD PAD.
PAD Control (0-3)
1) 4)
2) 3)
Activate PAD value
VOL.2-986
Flexible PAD
Flexible PAD (1-4)
= values of ARTD PAD.
1) Receive only (Send PAD =0 dB)
2) Send only (Receive PAD =0 dB)
3) ARTD only
4) Send and Receive
MG-PRI/PRA