NEC Univerge sv8500 Manual page 1226

Δ
13. SET IPPADDRESS
This command is used to specify IP Address and subnet mask for MG-PRI/PRA. To make this assignment
effective, it is required to execute the "SAVE" command and to restart before exiting the maintenance com-
mand.
MG-PRI > SET IPADDRESS 10.4.1.1 255.255.255.0
IP address set complete.
In order to make a setup reflect, re-starting is
required after saving a configuration file by
SAVE command.
The designated IP address cannot be applied when DHCP is set to "Enabled." Be sure to assign the DHCP
Note:
setting to "Disable" before performing this IP address assignment.
Δ Δ
P1 P2
VOL.2-973
P1-Specify the IP address
P2-Specify the subnet mask
A command is executed, and the result is displayed.
MG-PRI/PRA