NEC Univerge sv8500 Manual page 1309

• When DHCP server is NOT used
Set the following data on MG(PRI) side.
• DHCP Server Setting
MG-PRI(SIP)> SET DHCP DISABLE
DHCP setting succeeded
• IP address and subnet mask of MG(PRI)
MG-PRI(SIP)> SET IPADDRESS 10.10.10.170 255.255.255.0
IP Address setting succeeded.
• IP address of Default Gateway
MG-PRI(SIP)> SET DEFAULTROUTE 10.10.10.255
Default Gateway setting succeeded.
• IP address, port number, and host name of SIP Server
Host name can be omitted.
MG-PRI(SIP)> SET SIPSV_IPADDRESS
SIP Server (1-20):1
IP Address:10.41.1.150
Port Number:5060
Is there the Host Name ? [Y/N]:Y
Host Name:SRV1.nec.com
SIP server setting succeeded.
• LAN Interface Setting
MG-PRI(SIP)> SET INTERFACE
SPEED (AUTO/100M/10M):AUTO
Ethernet Speed setting succeeded.
• DNS Setting
Enable/Disable DNS. Specify the IP address of DNS when enabling DNS.
MG-PRI(SIP)> SET DNS_SW
DNS interface(Enable/Disable) [Disable]:ENABLE
DNS IP Address [0.0.0.0]:10.40.1.150
DNS Setting succeeded.
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
Note 1
Note 2
VOL.2-1056