NEC Univerge sv8500 Manual page 1059

12.2 Installation
This section shows how to install the hardware required for using MG(BRI). Be sure to
take measures to anti-static electricity.
12.2.1 How to Set MG(BRI)
• MG(BRI) Card [SCA-2BRIA]
This figure is an example to mount a MG(BRI) in the left slot on 1U-MPC.
Note:
100M LINK
ON
PWR ALM
LINE
STEP 1: Insert MG(BRI) to 1U-MPC
STEP 2: Secure the MG(BRI) to 1U-MPC fixing two screws on right and left sides.
1U-MPC (Multi Purposes Chassis)
B D B D CONSOLE
EMA TEL
MUSIC
Ether LINE0 LINE1
MG(BRI) Card (SCA-2BRIA)
RESET
bracket to mount on 19-inch rack
VOL.2-806
MG(BRI) [SCA-2BRIA/MG-2BRIA]
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required
Phillips screw driver