NEC Univerge sv8500 Manual page 729

14. Setting DSP smooth PAD mode:
MC-MG> SET SMOOTH_PAD 3
Smooth PAD Mode setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
15. Setting Stutter Dial Tone:
MC-MG> SET STUTTERDT ENABLE
Stutter Dial Tone setting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
Line 1: Enter a value of smooth PAD(1-5, OFF).
OFF=Set smooth PAD mode to OFF
1=+2.0dBm (default)
2=-5.2dBm
3=-2.1dBm
4=0dBm
5=-4.2dBm
Line 2: Result is shown.
Line 1: Enter ENABLE or DISABLE.
ENABLE=Stutter Dial Tone is valid
DISABLE=Stutter Dial Tone is invalid (default)
Line 2: Result is shown.
VOL.2-476
MCMG Card [SCA-7COTA]