NEC Univerge sv8500 Manual page 1300

14.3.4 Configuration Command Assignment
Assign the network data to MG(PRI) by configuration command operation on the maintenance console.
This section consists of two parts; procedure for Proprietary Protocol mode and procedure for SIP mode. The
following explains the procedure by each mode.
"DRS (Device Registration Server)" used in this section refers to the Telephony Server. When MG(PRI)
Note:
works in Proprietary Protocol mode, the Telephony Server acts as DRS, which is controlling function of the
Telephony Server.
"SIP server" used in this section refers to the Telephony Server. When MG(PRI) works in SIP mode, the
Note:
Telephony Server acts as SIP server.
The setting data here is an example. Assign the network data according to your network configuration.
Note:
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
VOL.2-1047