NEC Univerge sv8500 Manual page 602

• When DHCP server is used
Use SET DHCP ENABLE command to set the data and move on to STEP 5.
MC-MG> SET DHCP ENABLE
DHCP setting succeeded.
Assign the IP address of default gateway and DRS to DHCP server in this case. About IP address of DRS
Note:
(Telephony Server), refer to Vol.1, Chapter 2, "2. IP Related Basic Programming" in this manual
Confirm IP address saved in DHCP server as to get IP address of MCMG anytime.
Note:
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
VOL.2-349