NEC Univerge sv8500 Manual page 1254

13.4.5 DELETE Command
1. DELETE Δ VLAN
This command is used to delete VLAN. To make this assignment effective, it is required to execute the
"SAVE" command and to restart before exiting the maintenance command.
MG-PRI > DELETE VLAN 1
VLAN deleting succeeded.
Is this setup made to reflect immediately?(Y/
N):
-When "Y" is selected
VLAN deleting succeeded.
In order to make a setup keep, re-starting is
required after saving a configuration file by
SAVE command.
-When "N" is selected
In order to make a setup reflect and keep, re-
starting is required after saving a
configuration file by SAVE command.
Δ P1
VOL.2-1001
P1-Specify VLAN ID
1) Determine when the change is reflected on a system
Yes: reflected immediately
No: reflected later
A command is executed, and the result is displayed.
MG-PRI/PRA