NEC Univerge sv8500 Manual page 748

DELETE COMMAND
To delete the VLAN setting:
MC-MG> DELETE VLAN
VLAN deleting succeeded.
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
Note:
mand.
SAVE COMMAND
To save the configuration data to Flash ROM:
MC-MG> SAVE CONFIGDATA
* * Don't power off in progress **
Do you need save? [Y/N]: Y
Configuration data has been saved.
Re-starting is required for making a setup reflect!!
When the error occurs during saving, configuration data is not preserved.
Note:
GET COMMAND
To download Configuration Data file from specified TFTP server:
MC-MG> GET CONFIGDATA 10.41.1.150
Configuration data has been downloaded.
Configuration data file is downloaded from the specified TFTP server. When the destination file name is
Note:
not entered, file name of transferred folder is used automatically.
Line 1:
Line 2: Result is shown.
Line 1:
Line 2:
Line 3: Select either, Y or N.
Line 4: Result is shown.
Line 5:
Line 1: Specify the IP Address of TFTP Server after the
Command Name. (Example: 10.41.1.150)
Line 2: Result is shown.
VOL.2-495
MCMG Card [SCA-7COTA]