NEC Univerge sv8500 Manual page 958

Fp85-110 s7
Hide thumbs Also See for Univerge sv8500:
Table of Contents

Advertisement

3.
To show DHCP setting
MG-COT> SHOW DHCP
DHCP is ENABLE
4.
To show DNS Server
MG-COT(SIP) > SHOW DNS_SW
DNS interface: ENABLE
DNS IP Address: 10.41.2.101
The designated DNS Server cannot refer when Proprietary Protocol mode. Assign the SP mode before ex-
Note:
ecuting this DNS Server shown.
5.
To show DRS Address and Port Number
MG-COT> SHOW DRSADDRESS
IP Address
Primary
10.40.1.100
Secondary
0.0.0.0
Tertiary
0.0.0.0
Forth
0.0.0.0
The designated DRS cannot refer when SP mode. Assign the Proprietary Protocol mode before executing
Note:
this DRS shown.
About IP address of DRS (Telephony Server), refer to "Registration Destination of IP Devices/Stations" in
Note:
INTRODUCTION of Installation Manual.
6.
To show ToS setting of DRS session
MG-COT> SHOW DRSTOS
DRS TOS is 0xC0.
PRECEDENCE=6
DELAY=0
THROUGHPUT=0
RELIABILITY=0
COST=0
The designated DRS TOS cannot refer when SP mode. Assign the Proprietary Protocol mode before exe-
Note:
cuting this DRS TOS shown.
The current setting is shown.
The current setting is shown.
The current setting of DRS Address and
Port Number is
Port Number
shown.
3456
3456
3456
3456
The current setting is shown.
VOL.2-705
MG-COT Card [SCA-6COTB]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents