NEC Univerge sv8500 Manual page 690

<When registering to SP-PHI>
MG part of MCMG can be registered to either Internal PHI-BRI or SP-PHI. Here explains MCMG data assign-
ment for registering to SP-PHI. When registering to Internal PHI-BRI, refer to
[1] Internal PHE Data Assignment
When MG part of MCMG is registered to SP-PHI, MPH is used to control SP-PHI. For the use of MPH, it is
required to make Internal PHE function valid. So Internal PHE data assignment is necessary. About the proce-
dure for the Internal PHE data assignment, refer to Vol.1, Chapter 2, "2. IP Related Basic Programming" in this
manual. The explanation of PHs including Internal PHE is also there.
[2] SP-PHI Data Assignment
When MG part of MCMG is registered to SP-PHI, SP-PHI data assignment is necessary. About the procedure
for the SP-PHI data assignment, refer to Vol.1, Chapter 2, "2. IP Related Basic Programming" in this manual.
The explanation of PHs including SP-PHI is also there.
[3] MG Data Assignment
ASYD: Assignment of System Data
SYS1
INDEX 186, b6=1 (ISDN/MC-MG (COT) is in service)
INDEX 187=00 (Fixed)
INDEX 474 Guard Timer For Originating Call (MTC
bit 0-3 (MTC)
bit 4-6 (TC) Note: When assigning 1H, TC = 64 msec.
ARTD: Assignment of Route Class Data
Assign the Route Class Data for Virtual Speech Channel. The following data setting is necessary besides
Analog C.O BWT setting.
CDN1 OSGS = 0
CDN60 TC/EC = 1
CDN114 DCH = 1
CDN125 MGCOT = 1
When digits conversion is required for the received digits, assign the following data.
CDN66 (DC): Dialed Number Confirmation
Assign the number of digits for identifying the incoming line. Count the digits from the last one of the re-
Note:
ceived number.
<Related to MF>
CDN 72 MFSP
CDN 73 KPPT
CDN 74 KPST
CDN 75 MT
CCIS
Echo Canceler is available
Unify the channel
MC-MG (COT) is available
Sending Speed (0-15)
Duration of KP sending (0-15)
Pause after KP sending (0-15)
Step Code (0/1)
VOL.2-437
MCMG Card [SCA-7COTA]
page
×
TC)
427.