NEC Univerge sv8500 Manual page 1135

Default Gateway IP Address set
Assign the IP address of Default Gateway.
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y (change)/N (current)/
Q(quit)]: y
Input new Default Gateway: 10.40.1.254
Specify the Default Gateway in the same subnet of MG(BRI).
Note:
Current data setting is displayed.
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the IP address of Default Gateway.
VOL.2-882
MG(BRI) [SCA-2BRIA/MG-2BRIA]