NEC Univerge sv8500 Manual page 1248

Δ
14. SHOW SMOOTH_PAD
This command is used to display Smooth PAD mode of DSP.
MG-PRI> SHOW SMOOTH_PAD
Smooth PAD mode is 2.
Δ
15. SHOW STARTPORT
This command is used to display the start port of RTP.
MG-PRI > SHOW STARTPORT
Number of RTP start port is 1024.
Δ
16. SHOW TCP_TIMER
This command is used to display the setting of the timer for TCP Link Connection.
MG-PRI > SHOW TCP_TIMER
TCP Link Connect Timer Timeout is 60
seconds.
The current setting is displayed.
The current setting is displayed.
The current setting is displayed.
VOL.2-995
MG-PRI/PRA