NEC Univerge sv8500 Manual page 1339

Change Host Name? [Y (change)/N (current)/Q(quit)]: Y
Input new Host Name: mgpri.nec.com
--- Default Gateway IP Address set ---
Current Default Gateway: 0.0.0.0
Change Default Gateway? [Y (change)/N (current)/
Q(quit)]: Y
Input new Default Gateway: 10.41.1.254
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server IP Address Port Number Host Name
1 0.0.0.0
2 0.0.0.0
3 0.0.0.0
4 0.0.0.0
5 0.0.0.0
6 0.0.0.0
7 0.0.0.0
8 0.0.0.0
9 0.0.0.0
10 0.0.0.0
11 0.0.0.0
12 0.0.0.0
13 0.0.0.0
14 0.0.0.0
15 0.0.0.0
16 0.0.0.0
17 0.0.0.0
18 0.0.0.0
19 0.0.0.0
20 0.0.0.0
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: Y
Input new SIP Server (1-20): 1
Input new IP Address: 10.41.1.200
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
5060
VOL.2-1086
MG(PRI) (1.5M) [SCA-24PRIA/MG-24PRIA]
9) Select the host name setting of
MG(PRI).
Y: Change the setting
N: Remain the current setting
Q: Exit the command
10) Specify a new host name.
The current setting is displayed.
11) Select the default gateway set-
ting.
Y: Change the setting
N: Remain the current setting
Q: Exit the command
12) Specify the IP address of the
default gateway. Note that default
gateway should be located in the
same segment with MG(PRI).
The current setting is displayed.
13) Select the SIP Server setting.
Y: Change the setting
N: Remain the current setting
Q: Exit the command
14) Specify the number of SIP
Server to be modified.
15) Specify the IP address of SIP
Server. Note 1