NEC Univerge sv8500 Manual page 437

SHOW COMMAND
1. To show Burst Ringer Pattern setting:
MC(SIP)> SHOW BURSTPATTERN
Burst Ringer Pattern is 1
(0.35s ON - 0.3s OFF - 0.35s ON)
2. To show Channel Attribute:
MC(SIP)> SHOW CH_ATTRIBUTE
CH FAX PROTOCOL
CH00 OFF
CH01 OFF
CH02 OFF
CH03 OFF
CH04 OFF
CH05 OFF
CH06 OFF
CH07 OFF
3. To show Caller ID Send Wait Timer:
MC(SIP)> SHOW CID_SEND_WAIT
CallerID Send Wait Timer is 600ms.
4. To show CODEC Coefficiency:
MC(SIP)> SHOW CODEC_COEF
CH00=0
CH01=0
CH02=0
CH03=0
CH04=0
CH05=0
CH06=0
CH07=0
8LC Card [SCA-8LCA/SCA-8LCA-EMEA/SCA-8LCC/SCA-8LCC-EMEA]
ECM FAX RATE
OFF 14400
OFF 14400
OFF 14400
OFF 14400
OFF 14400
OFF 14400
OFF 14400
OFF 14400
VOL.2-184
The current setting of Burst Ringer Pattern is shown.
The current setting is shown.
The current setting is shown.
The current setting is shown.