NEC Univerge sv8500 Manual page 1231

Δ
19. SET TCP_TIMER P1
This command is used to specify the timer waiting for TCP link connection.
MG-PRI > SET TCP_TIMER P1
TCP Link Connect Timer Timeout setting
succeeded.
In order to make a setup reflect, re-starting is
required after saving a configuration file by
SAVE command.
P1-Specify the waiting time (30 seconds interval)
60-80 = effective waiting time (Default: 60)
A command is executed, and the result is displayed.
VOL.2-978
MG-PRI/PRA