NEC Univerge sv8500 Manual page 600

7.3.4 Configuration Command Assignment
Assign the configuration data by command operation on maintenance console.
"DRS (Device Registration Server)" used in this section refers to the Telephony Server. The Telephony
Note:
Server acts as DRS for MCMG using Proprietary Protocol.
The setting data here is an example. Assign the network data according to your network configuration.
Note:
STEP 1: When the boot program is started, the initial display below is displayed on the screen.
MCMG-ID: xxxxxx
Starting MC-MG(COT) Bootprogram......
--- Online program Initial start --- (wait 30sec)
:
:
:
->
->
->
STEP 2: Type "usrConsole" at the indicated OS prompt and press the ENTER key.
->
->
->usrConsole
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
VOL.2-347