NEC Univerge sv8500 Manual page 1178

10. SHOW INTERFACE
Displays the current setting for speed and activation mode of Ethernet controller.
MG-BRI(SIP)> SHOW INTERFACE
Ethernet SPEED
100MBPS
11. SHOW LAN_ERROR_CHECK
Displays the interval to detect LAN cable fall-off.
MG-BRI(SIP)> SHOW LAN_ERROR_CHECK
LAN Error Check Timer is 1000.
12. SHOW ONE_TIME_PASS
Displays the current setting of one time password.
MG-BRI(SIP)> SHOW ONE_TIME_PASS
One Time Password is 12345#.
13. SHOW OWN_IPADDRESS
Displays the current setting of IP Address, Subnet Mask, and Host Name of MG(BRI) itself.
MG-BRI(SIP)> SHOW OWN_IPADDRESS
IP Address Subnetmask
192.168.1.100 255.255.255.0
14. SHOW RTP_START_PORT_NO
Displays the current setting of RTP Start Port Number.
MG-BRI(SIP)> SHOW RTP_START_PORT_NO
RTP start port number is 1024.
15. SHOW RTP_STOP_DETECT
Displays the current setting of RTP Stop Detect Timer.
MG-BRI(SIP)> SHOW RTP_STOP_DETECT
RTP Stop Detect Timer is 3 sec.
DUPLEX
FULL
Host Name
mgbrisip
VOL.2-925
MG(BRI) [SCA-2BRIA/MG-2BRIA]