NEC Univerge sv8500 Manual page 1136

SIP Server IP Address & Host Name set
Assign the IP address, port number, and host name of SIP server.
--- SIP Server IP Address & Host Name set ---
Current SIP Server/IP Address/Port Number/Host Name:
SIP Server IP Address
1 0.0.0.0
2 0.0.0.0
3 0.0.0.0
4 0.0.0.0
5 0.0.0.0
6 0.0.0.0
7 0.0.0.0
8 0.0.0.0
9 0.0.0.0
10 0.0.0.0
11 0.0.0.0
12 0.0.0.0
13 0.0.0.0
14 0.0.0.0
15 0.0.0.0
16 0.0.0.0
17 0.0.0.0
18 0.0.0.0
19 0.0.0.0
20 0.0.0.0
Change SIP Server Information? [Y (change)/N (cur-
rent)/Q(quit)]: y
Input new SIP Server (1-20): 1
Input new IP Address: 10.41.1.150
Input new Port Number: 5060
Is there the Host Name? [Y/N]: y
Input new Host Name: SVR1.nec.com
Continue? [Y (continue)/N (exit)]: n
SIP server refers to the Telephony Server.
Note 1:
Port Number Host Name
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
0 blank
VOL.2-883
MG(BRI) [SCA-2BRIA/MG-2BRIA]
Note 1
Current data setting is displayed.
Asked whether to change the displayed data.
Y: To change the displayed data
N: Not change
Q: Quit Standard mode
Enter the SIP server number.
Enter the IP address of SIP server.
Enter the port number of SIP server.
Asked whether to use host name.
Y: Use host name
N: Not use host name
Enter the SIP server's host name in full-domain.
(up to 63-byte of characters, . (period) and -
(hyphen) is available)
Asked whether to continue this command setting.
Y: Continue this command to set other SIP
server data
N: Go on to the next command
Note 2