NEC Univerge sv8500 Manual page 1179

16. SHOW SIGNALING_PORT_NO
Displays the current setting of Signaling Port number
MG-BRI(SIP)> SHOW SIGNALING_PORT_NO
Signaling port number is 5060.
17. SHOW SIGNALING_QOS
Displays the current setting of QoS data for signaling session.
MG-BRI(SIP)> SHOW SIGNALING_QOS
Signaling QOS is 0xC0 (QOS=IP PRECEDENCE)
PRECEDENCE
DELAY
THROUGHPUT
RELIABILITY
COST
18. SHOW SIP_MADDR
Displays the current setting of SIP maddr.
MG-BRI(SIP)> SHOW SIP_MADDR
SIP maddr is 0x01.
SEND =0
RECEIVE=1
19. SHOW SIP_RPORT
Displays the current setting of SIP rport.
MG-BRI(SIP)> SHOW SIP_RPORT
SIP rport is 0x01.
SEND =0
RECEIVE=1
=6
=0
=0
=0
=0
VOL.2-926
MG(BRI) [SCA-2BRIA/MG-2BRIA]
This example is assigned with IP Precedence.