Rear View Of Mcmg Card [Sca-4Lc2Cota]; Rear View Of Mcmg Box [Mg-4Lc2Cota] - NEC Univerge sv8500 Manual

This figure is an example when the 1U-MPC is in single power configuration. Prepare one more power unit
Note:
for dual power configuration.
NAME
AC power inlet
Power switch
PACT lamp
Note 1
PACT lamp is only for MCMG Card [SCA-4LC2COTA]. MCMG Box [MG-4LC2COTA] does not have
Note 1:
PACT lamp.
For the safety measures against static electricity, lightning strike, and other electrical surges, be sure to
Note:
make proper connection to grounding (less than 10
struck by lightning directly, the lightning might cause damage to MCMG and AC power adapter without
Ground connection.

Rear View of MCMG Card [SCA-4LC2COTA]

Cooling fan

Rear View of MCMG Box [MG-4LC2COTA]

Connectors, Lamps, and Switches on Rear Panel
Connected to AC-DC adapter with an
attached three-polar grounded AC
power cable
(Cable Length: 3 m [9.8 ft.])
Power ON/OFF switching
Indicates the state in power unit
VOL.2-312
MCMG [SCA-4LC2COTA/MG-4LC2COTA]
Power switch
PACT
PACT lamp
Power switch
AC power cable stopper
FUNCTION
AC 100V (50/60 Hz) ± 10%
AC 120V (50/60 Hz) ± 10%
AC 230V (50/60 Hz) ± 10%
AC 240V (50/60 Hz) ± 10%
Lights green: Normal operation
OFF: Power failure
Ω ). As MCMG has PSTN interface, if the line cable is
AC power inlet
AC power cable stopper
AC power inlet